Auto Glass Repair and Replacement
Removing the Trim
- First step is to remove the old trim that is holding the windshield in place.
Removing the Windshield
- Once the trim is removed, the windshield is lifted away from the car.
Cleaning Out and Preparing the Pinch Weld
- Once the windshield is removed, the pinch weld is cleaned out and prepared. The pinch weld is the small gap between the windshield and the body of your car that holds or pinches the edges of the windshield. Cleaning it before installing a new windshield is important to ensure the windshield can fit in the pinch weld, allowing it to fully hold the windshield glass.
Applying Urethane
- Once the pinch weld is cleaned, urethane is applied to the edges of the pinch weld. Urethane acts like a glue or adhesive that holds the windshield in place.
Installing the New Windshield
- Once the urethane is in place, the windshield is carefully fitted over the hole on your car. The glass is moved so that it fits within the pinch weld. Once properly positioned, it is pushed into place, typically with suction cups and bars, and held there for several minutes. Once the urethane begins to set, the suction cups are removed and the windshield is allowed to completely cure. The curing process varies based on the weather outside and the type of urethane used, but typically, most people can drive their car as soon as the new windshield is installed.
​
Chip Repair
If your rock chip on your windshield is smaller than a dime, we will mostly be able to repair it! Opting for chip repair proves to be a cheap and cost-effective alternative to replacing the entire windshield. Our mission is to deliver efficient and budget-friendly solutions, preserving your vehicle in optimal condition without unnecessary expenses. Once it has been verified that the chip is able to be repaired, the process can begin.
Clean out the Chip
-
Any dirt, debris, and glass fragments that are in the crack will be removed.
Create a Vacuum
-
Once the chip has been prepared, the crack repair tool is put in place and creates a vacuum.
Resin Filling
-
After the air has been removed, the resin is forced into the crack.
Cure Around the Repair
-
The resins used are cured by exposing them to UV light. This causes them to become hard and bond the crack together.
Pit Fill
-
Filling this pit in the glass will require additional resin to what would be required for a crack repair.
Cure the Resin
-
Once the pit has been filled, the whole crack can now be cured.
Remove Excess Resin
-
In order for wipers to work without issue, the repair needs to be smoothed off to the same level as the windshield.
Truck Glass Services
Windshield Replacement and Repair:
From minor chips to extensive cracks, our skilled technicians are equipped to handle all your windshield repair and replacement needs promptly, ensuring your truck stays on the road safely. From Ford pickups to Cascadias to Coronados to Colombias, we provide auto glass services to all!
Side and Rear Glass Services:
Our expertise extends beyond windshields. We specialize in door glasses, vent and quarter glasses, sleeper windows and rear glass replacements and repairs, addressing any damage to maintain the integrity of your truck.
Commercial Fleet Services:
Inter Auto Glass offers tailored solutions for commercial truck fleets. Keep your business moving forward with our efficient and reliable truck glass services designed to minimize downtime.
Heavy-Duty and Semi-Truck Glass:
For heavy-duty trucks and semi-trucks, we provide specialized glass services, understanding the unique requirements of these vehicles to ensure optimal visibility and safety. We understand that truck drivers need to get on the road promptly, so choose Inter Auto Glass for mobile service to your truck stop now!
Window Tinting
Getting window tints during summer is always the best idea because the warm weather can be unforgiving on most days. Nothing is more painful than getting inside a hot and stuffy car where you cannot breathe.
- Prep windows
The first thing car window tinting installers will do is clean and remove all the dirt and debris. This is a necessary step before applying any film.
- Take measurements
The film will be laid out on the exterior surface of your car’s window before being cut down. During this time, your installers will also use a heat gun to shrink the film. That process adds curves to the glass.
- Peel board comes
Then they will put it on their own glass, which is called the peel board. This helps cut even finer details for the shape of your windows. If there is any release liner, this is when they will remove that.
- Place the film
Installers will place the film on the surface of your windows. They will use a soap and water solution. This will be sprayed onto both the window and film. With a sponge or squeegee, they will remove any extra solution that is under the film.
- Final check
Your installer and their team will do their final checks to ensure that all the film is applied correctly.
Now that the auto window tinting job is done, the installer will then call you to come and collect your car.
Comprehensive Solutions
At Inter Auto Glass, our commitment to excellence goes beyond standard auto care, offering a diverse range of comprehensive solutions to address all your vehicle's needs. Explore our comprehensive services:
-
Door and Window Motors-Regulators: Does your door glass keep falling down? Our skilled technicians ensure seamless functionality for your vehicle's door and window motors-regulators, enhancing your driving experience.
-
Wiper Blade Replacements: Maintain optimal visibility during various weather conditions with our high-quality wiper blade replacements, guaranteeing a clear and safe drive.
-
Back Glass Defroster Repairs: Trust us for efficient back glass defroster repairs, ensuring your defroster operates effectively for enhanced visibility.
-
Glass Molding Solutions: Preserve your vehicle's structural integrity with our precise glass molding solutions, preventing water leaks and maintaining overall robustness.
-
Fixing Leaking Glasses: Say goodbye to leaks with our expert solutions. We identify and fix sources of leakage, ensuring a dry and comfortable interior for your driving pleasure.
At Inter Auto Glass, we strive to provide all-encompassing care for your vehicle, ensuring it receives the meticulous attention it deserves. Experience the difference with our comprehensive solutions – schedule your appointment today.
Mobile Service
At Inter Auto Glass, we recognize the value of your time, and that's why we bring our expert services directly to you with our convenient mobile offerings. Our mobile services cover a wide range, including most Chicago suburbs, truck stops, dealerships, body shops, and beyond. Wherever you are, our seasoned technicians ensure that our professional auto glass solutions are delivered to your doorstep.
Enjoy the flexibility of scheduling appointments that align with your busy lifestyle. We bring our services to various locations, ensuring easy access to top-notch auto glass solutions without disrupting your routine.
Your safety remains our top priority. With our mobile service, your auto glass concerns are promptly addressed with the same precision and expertise as our in-shop services. Experience the convenience of our mobile solutions – where exceptional service meets you on the go.
We provide mobile service for auto glass replacements to Des Plaines, Schuamburg, Skokie, Addison, Elk Grove Village, Palos Hills and more!